-
Shell made entirely from polypropylene, with 25 mm reinforcement around the perimeter obtained by gas-assisted injection moulding for greater strength and durability. Backrest with cut-out allows “breathing” for greater comfort. Lumbar support reduces fatigue caused by long periods of sitting. Wide seat maximises comfort and attention in the classroom. Anti-sway system. No edges, rounded profile for correct knee flexion angle, helping blood circulation. Superior resistance to impacts, scratches and wear. Maintenance-free. Recess-free design for quick and easy cleaning. Small hole in the seat for draining liquids.
Diam 25×2 mm steel tube structure with epoxy paint finish. With 1 lower lock in 25×1.5 mm Diam tube.
Non-slip pads on the underside of the shell for support on the table, making it easier to clean the surrounding area.
Floor support with 4 polyamide pads.
Dimensions (cm)
T 05 – Width – 52 | Depth – 50,4 | Seat height 43 | Overall height 78,5
-
40 x 40 cm square steel tube frame with electrostatic epoxy powder coating. Levelling feet.
19 mm thick melamine top with PVC edges.
Accessories:
Enhance your desk with added functionality thanks to a wide range of accessories to choose from: extensions, dividers, front panels, cable glands and rails.
SEE THE FINISHES
-
Square steel tube structure with electrostatic epoxy powder coating.
Levelling feet.
Raised 19 mm thick melamine top with PVC edges.
SEE FINISHES
-
Oval meeting table – initial module; intermediate module; final module.
Central leg structure, made of tubing and circular base in stainless steel.
19 mm thick melamine top, edged in PVC.
Cable glands can be installed.
Includes a connection system between modules.
SEE THE FINISHES
Product already in the list
-
Rounded plywood shell, beech veneer with polyurethane varnish over two layers of anti-pore varnish.
Structure with 4 support points made of 25×1.5mm diameter steel tubing with epoxy paint finish.
With 2 closures in 16×1.5mm diameter tubing.
Floor support with 4 external posts 28mm in diameter and 40mm in height.
Shell covered in semi-leather or fire-retardant fabric.
Dimensions: 59 x 54 x 78.5 cm.
SEE FINISHES
-
Rounded plywood shell, beech veneer with polyurethane varnish over two layers of anti-pore varnish.
Structure with 4 support points made of 25×1.5mm diameter steel tubing with epoxy paint finish.
With 2 closures made of 16×1.5mm diameter tubing.
Supported on the ground by 4 external posts measuring 28mm in diameter and 40mm in height.
Option of padded shell in semi-leather or fire-retardant fabric.
SEE FINISHES
Dimensions: 59 x 54 x 78,5 cm
-
Rounded plywood shell, beech veneer with polyurethane varnish on two layers of pores.
5-point support structure with polyamide castors, single-piece nylon base, seat support in steel tubing and steel sheet with epoxy paint finish.
Gas lift height adjustment system with 95 mm stroke.
Dimensions: 63.5 x 63.5 x 75-85 cm.
SEE FINISHES
-
Rounded plywood casing, beech veneer with polyurethane varnish over two layers of porous coating.
Structure with 4 support points made of 25 x 1.5 mm diameter steel tubes with epoxy paint finish. With 2 closures made of 16 x 1.5 mm diameter tubes.
Floor support via 4 external posts measuring 28 mm in diameter and 40 mm in height.
Option of semi-leather or fire-retardant fabric cover.
Dimensions: T5 – 47.4 x 50 x 76 cm | T6 – 47.6 x 51.6 x 79 cm | T7 – 48 x 54.5 x 84 cm
SEE FINISHES
-
Rounded plywood shell, beech veneer with polyurethane varnish on two layers of porous coating.
Spider-shaped structure with 4 support points, made of 25×1.5 mm diameter steel tubing with epoxy paint finish.
Lower support for backpacks made of 16×1.5 mm diameter tubing and 6 mm diameter steel rod with epoxy paint finish.
Tablet with rounded corners in 13 mm thick compact melamine, dimensions 480×300 mm.
Allows 360º rotation around the chair and 360º rotation on its own axis.
Supported on the floor by 4 polyamide castors.
Padded shell in imitation leather or fire-retardant fabric.
Dimensions: 59.5 x 71 x 80 cm
SEE FINISHES
-
Rounded plywood shell, beech veneer with polyurethane varnish on two layers of porous coating.
Spider-shaped structure with 4 support points, made of 25×1.5 mm diameter steel tubing with epoxy paint finish.
Lower support for backpacks made of 16×1.5 mm diameter tubing and 6 mm diameter steel rod with epoxy paint finish.
Shelf with rounded corners in 13 mm thick compact melamine, dimensions 480×300 mm.
Allows 360º rotation around the chair and 360º rotation on itself.
Supported on the floor by 4 polyamide castors.
Dimensions: 59.5 x 71 x 80 cm
SEE FINISHES
-
Rounded plywood shell, beech veneer with polyurethane varnish on two layers of porous coating.
Ø10 mm steel rod structure with epoxy paint finish.
With 2 fasteners made of 16×1.5 mm diameter tubing.
Supported on the floor by 4 polyamide rods.
Option of padded shell in imitation leather or fire-retardant fabric.
SEE FINISHES
-
Rounded plywood shell, beech veneer with polyurethane varnish on two layers of porous coating.
Ø10 mm steel rod structure with epoxy paint finish.
With 2 fasteners made of 16×1.5 mm diameter tubing.
Supported on the ground by 4 polyamide rods.
Dimensions: 55 x 47 x 75 cm | 55 x 47 x 66 cm
SEE FINISHES
-
The Ergos Shell ‘BASE’ is a classic four-legged model chair that stands out for its stability and sturdiness, offering an extremely comfortable seat. It is designed to withstand daily use and guarantee durability over time.
It is ideal for dining rooms, auditoriums, classrooms and workrooms.
Various models are available: with castors for easy mobility, with armrests for better support, with a hand rest for easier writing, or in a high version for greater ergonomics.
Shell made entirely of polypropylene, with 25 mm reinforcement around the entire perimeter obtained by gas-assisted injection for greater strength and durability.
OPTIONS:
Castors, armrests, footrest and padded seat.
-
Round tube structure.
Central base and plinth in stainless steel.
19mm thick melamine top, edged with PVC.
Product already in the list
-
Removable structure made of 40x40x1.5 mm or 50x30x1.5 mm steel tubing with epoxy paint finish.
19 mm melamine worktop with PVC edge.
40x20x1.5 mm steel tube bolts.
4 levellers for floor support.
Option to include one cable grommet in the centre or two cable grommets (left and right).
Product already in the list
-
40x40x1.5 mm steel tube frame with epoxy paint finish.
19 mm melamine top with PVC edge.
The top can be adjusted to a height of 740 or 900 mm during assembly.
40x20x1.5 mm steel tube bolts.
4 levellers for floor support.
Includes two cable glands spaced 500 mm apart.
Includes accessories for the sides: 1 shelf 400x80x120 mm and 2 containers 100x80x120 mm.
Includes a tray for horizontal and vertical technical cables.
Includes a light fitting and a switch.
Product already in the list
