40 x 40 cm square steel tube frame with electrostatic epoxy powder coating. Levelling feet.
19 mm thick melamine top with PVC edges.
Accessories:
Enhance your desk with added functionality thanks to a wide range of accessories to choose from: extensions, dividers, front panels, cable glands and rails.
Square steel tube structure with electrostatic epoxy powder coating.
Levelling feet.
Raised 19 mm thick melamine top with PVC edges.
Oval meeting table – initial module; intermediate module; final module.
Central leg structure, made of tubing and circular base in stainless steel.
19 mm thick melamine top, edged in PVC.
Cable glands can be installed.
Includes a connection system between modules.
Rounded plywood shell, beech veneer with polyurethane varnish over two layers of anti-pore varnish.
Structure with 4 support points made of 25×1.5mm diameter steel tubing with epoxy paint finish.
With 2 closures in 16×1.5mm diameter tubing.
Floor support with 4 external posts 28mm in diameter and 40mm in height.
Shell covered in semi-leather or fire-retardant fabric.
Dimensions: 59 x 54 x 78.5 cm.
Rounded plywood shell, beech veneer with polyurethane varnish over two layers of anti-pore varnish.
Structure with 4 support points made of 25×1.5mm diameter steel tubing with epoxy paint finish.
With 2 closures made of 16×1.5mm diameter tubing.
Supported on the ground by 4 external posts measuring 28mm in diameter and 40mm in height.
Option of padded shell in semi-leather or fire-retardant fabric.
Dimensions: 59 x 54 x 78,5 cm
Rounded plywood shell, beech veneer with polyurethane varnish on two layers of pores.
5-point support structure with polyamide castors, single-piece nylon base, seat support in steel tubing and steel sheet with epoxy paint finish.
Gas lift height adjustment system with 95 mm stroke.
Dimensions: 63.5 x 63.5 x 75-85 cm.
Rounded plywood casing, beech veneer with polyurethane varnish over two layers of porous coating.
Structure with 4 support points made of 25 x 1.5 mm diameter steel tubes with epoxy paint finish. With 2 closures made of 16 x 1.5 mm diameter tubes.
Floor support via 4 external posts measuring 28 mm in diameter and 40 mm in height.
Option of semi-leather or fire-retardant fabric cover.
Dimensions: T5 – 47.4 x 50 x 76 cm | T6 – 47.6 x 51.6 x 79 cm | T7 – 48 x 54.5 x 84 cm
Rounded plywood shell, beech veneer with polyurethane varnish on two layers of porous coating.
Spider-shaped structure with 4 support points, made of 25×1.5 mm diameter steel tubing with epoxy paint finish.
Lower support for backpacks made of 16×1.5 mm diameter tubing and 6 mm diameter steel rod with epoxy paint finish.
Tablet with rounded corners in 13 mm thick compact melamine, dimensions 480×300 mm.
Allows 360º rotation around the chair and 360º rotation on its own axis.
Supported on the floor by 4 polyamide castors.
Padded shell in imitation leather or fire-retardant fabric.
Dimensions: 59.5 x 71 x 80 cm
Rounded plywood shell, beech veneer with polyurethane varnish on two layers of porous coating.
Spider-shaped structure with 4 support points, made of 25×1.5 mm diameter steel tubing with epoxy paint finish.
Lower support for backpacks made of 16×1.5 mm diameter tubing and 6 mm diameter steel rod with epoxy paint finish.
Shelf with rounded corners in 13 mm thick compact melamine, dimensions 480×300 mm.
Allows 360º rotation around the chair and 360º rotation on itself.
Supported on the floor by 4 polyamide castors.
Dimensions: 59.5 x 71 x 80 cm
Beech veneered plywood shell with polyurethane varnish over two layers of pore filler.
Structure with 4 supports, made of Ø16 mm steel tubing, painted with epoxy.
Lacquered steel tubing structure or stainless steel tubing structure.
Polyamide end caps.
Dimensions: 59 x 54 x 45 cm
Beech veneered plywood shell with polyurethane varnish over two layers of pore filler.
Structure with 4 supports, made of Ø16 mm steel tubing, painted with epoxy.
Lacquered steel tubing structure or stainless steel tubing structure.
Polyamide end caps.
Upholstered shell in imitation leather or fire-retardant fabric.
Dimensions: 59 x 54 x 45 cm
Steel tube frame. Shell and armrests in plywood, beech veneer.
Wood with polyurethane varnish.
Polyamide end caps.
Rounded plywood shell, beech veneer with polyurethane varnish on two layers of porous coating.
Ø10 mm steel rod structure with epoxy paint finish.
With 2 fasteners made of 16×1.5 mm diameter tubing.
Supported on the floor by 4 polyamide rods.
Option of padded shell in imitation leather or fire-retardant fabric.
Rounded plywood shell, beech veneer with polyurethane varnish on two layers of porous coating.
Ø10 mm steel rod structure with epoxy paint finish.
With 2 fasteners made of 16×1.5 mm diameter tubing.
Supported on the ground by 4 polyamide rods.
Dimensions: 55 x 47 x 75 cm | 55 x 47 x 66 cm
Steel tube frame. Seat and armrests in plywood with beech veneer. Frame with epoxy paint and wood with polyurethane varnish. Polyamide end caps.
Steel tube frame. Shell and palm tree made of plywood, beech veneer. Frame with epoxy paint and wood with polyurethane varnish. Polyamide end caps.
