Ensure your space is organised and efficient with our accessories.
Foot-operated hand sanitiser dispenser, avoiding contact with hands.
Adaptable to several types of dispensers with maximum dimensions: 115 x 115 x 310 mm.
Metal structure made of 1.5 mm sheet metal.
Epoxy paint finish (RAL 7021 and 7035).
Can be fixed to the floor.
For use on service tables or other solutions.
3 mm thick acrylic.
3 mm thick epoxy-coated steel sheet metal support base.
Opening [350 x 150 mm] for passing documents and ATM systems.
Mobile metal stand for CPU with dimensions of 200x450x120 mm.
1.5 mm steel sheet structure with epoxy paint finish and support handle for Ø6 mm pole.
Floor support with Ø50 mm castors (2 with brakes).
Atlantic suspended computer support with dimensions of 200x470x490 mm.
For use with Atlantic tables and to be fixed to the tabletop with 8 screws.
1.5 mm steel sheet structure with epoxy paint finish.
Metal sub-plate made of 1.25 mm steel sheet with 15×15 mm square perforations.
Applicable to:
All Q3 tables
Corner tables with tops measuring 700×500 mm, 750×600 mm and 1200×600 mm
Attached using 4 x 4.5×16 mm screws.
Floor space: 492 x 250 x 117 mm
Metal ashtray for outdoor use.
Option to fix to the ground with M6 screws or base for placing on the ground. Metal structure made of 3 mm steel sheet with epoxy paint or stainless steel option.
Lock allowing access for disposing of waste.
Base measuring 20 x 20 cm.
Set of four containers for the selective collection of solid waste: glass, plastic/metal, paper/cardboard and unsorted waste.
Structure made of 1.25 mm thick steel sheet, painted with epoxy. Mounted on a common base allowing maintenance of the entire unit.
Inner container made of 0.8 mm thick galvanised sheet metal, removable via top access. Containers with hinged lids, not easily removable, without sharp edges, for inserting waste.
The floor is held in place by 6 conical nails, which are wear-resistant and difficult to remove during use.
Standard colours depending on the type of waste they are intended for.
Volume of each container: 35 litres.
Dimensions de chaque conteneur (largeur x profondeur x hauteur) : 300 x 260 x 833 mm.
Set of three containers for the selective collection of solid waste: glass, plastic/metal, paper/cardboard or unsorted waste.
Structure made of 1.25 mm thick steel sheet, painted with epoxy. Mounted on a common base allowing maintenance of the entire unit.
Inner container made of 0.8 mm thick galvanised sheet metal, removable via top access. Containers with hinged lids, not easily removable, without sharp edges, for inserting waste.
The floor is held in place by 6 conical nails, which are wear-resistant and difficult to remove during use.
Standard colours depending on the type of waste they are intended for.
Volume of each container: 35 litres.
Dimensions de chaque conteneur (largeur x profondeur x hauteur) : 300 x 260 x 833 mm.
Steel tube structure with epoxy paint finish.
Removable steel sheet tray.
Polyamide terminals.
Steel sheet structure with epoxy paint finish.
Sliding glass doors on aluminium rails with rack lock.
7 mm thick cork chipboard mounting surface.
Rear fittings for wall mounting.
Dimensions: 150 x 7 x 75 cm
ERGOS TRAY trays stand out for their versatility and storage efficiency. They fit easily not only into existing furniture, but also into our various solutions. They offer a practical and smart solution for optimising space. With their dividers and other accessories available, it is easy to organise your belongings. ERGOS TRAY trays are ideal for keeping spaces organised and functional.
Options:
Castors, PET lid, padded lid, metal dividers, PET dividers and foam dividers.
Dimensions:
T1: 31 x 37.5 x 7.5 cm
T2: 31 x 37.5 x 15 cm
Colours:
